Viper Products

If you are looking for a rock-solid holster or magazine pouch that is beautifully made and manufactured here in Australia, then there is only one, and its Viper.

Built to last these Viper Products are made from top quality Delrin (no filler) and aluminum.

Built here in Australia by Jim Cohen, the Viper Products have an almost cult following, and you will see why when you purchase one, they are the epitome of functionality, there is nothing on them that does not need to be there.

Australian made, built to last a lifetime, and simply beautiful, a choice you will never regret.

Viper 1911 Single Stack Magazine Pouch – Adjustable

Features:

  • The magazine pouch can be angled, from 0 – 20 degrees either side of vertical.
  • The tension can be adjusted via a spring-loaded knurled knob on the side of the magazine pouch.​

Notes:

  • This Magazine Pouch will fit up to a 1.5″ width belt.
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper 1911 Single Stack Magazine Pouch – Classic

Features:

  • The belt attachment can be secured to give the magazine pouch a 10-degree slant either to the right or the left.
  • The tension can be adjusted via a cap head screw on the side of the magazine pouch.

Notes:

  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper CZ/Tanfoglio 9mm Double Stack Magazine Pouch – Adjustable

Features:

  • The magazine pouch can be angled, from 0 – 20 degrees either side of vertical.
  • The tension can be adjusted via a spring loaded knurled knob on the side of the magazine pouch.

Notes:

  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper Glock Double Stack Magazine Pouch – Adjustable

Features:

  • The magazine pouch can be angled, from 0 – 20 degrees either side of vertical.
  • The tension can be adjusted via a spring loaded knurled knob on the side of the magazine pouch.

Notes:

  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper Holster – Right Hand (1911/2011)

Note: This Holster will fit up to a 1.5″ width belt


Viper Magnetic Magazine Pouch

Features:

  • 40mm dia. powerful magnetic.
  • Aluminium belt attachment.

Notes:

  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper S&W K/L/N Revolver Holster – Right Hand

Note: This Holster will fit up to a 1.5″ width belt


Viper STI/SVI/Tanfoglio/CZ Magnetic Double Stack Magazine Pouch – Adjustable

Features:

  • The magazine pouch can be angled, from 0 – 20 degrees either side of vertical.
  • Suitable for both Standard Division and Open Division Magazines as the magazine pouch has 2 x 20mm dia. magnetics and a lip either side to ensure longer open division (170mm) magazines are also secured.

Notes:

  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper 6/7-Shot 9mm/.38/.357 Magnetic Moon-Clip Holder – 45 Degrees

Securely hold both blue steel and stainless steel moonclips in place on your belt with these Viper 6-Shot 9mm/.38/.357 Magnetic Moon-Clip Holders.

Features:

  • Aluminium hanger and belt bracket,
  • Strong 20mm dia. magnet
  • Top quality Delrin (no filler) post.

Built here in Australia by Jim Cohen, the Viper Products have an almost cult following, and you will see why when you purchase one, they are the epitome of functionality, there is nothing on them that does not need to be.

Notes:

  • The diameter of the magnetic is 14.90mm/0.587″
  • This Magazine Pouch will fit up to a 1.5″ width belt

Viper 6/7-Shot 9mm/.38/.357 Magnetic Moon-Clip Holder – 90 Degrees

Securely hold both blue steel and stainless steel moonclips in place on your belt with these Viper 6-Shot 9mm/.38/.357 Magnetic Moon-Clip Holders.

Features:

  • Aluminium hanger and belt bracket,
  • Strong 20mm dia. magnet
  • Top quality Delrin (no filler) post.

Mounting Options:

  • Low
  • High

Notes:

  • The diameter of the magnetic is 14.90mm/0.587″
  • This Magazine Pouch will fit up to a 1.5″ width belt

Viper 8-Shot 9mm/.38/.357 Magnetic Moon-Clip Holder – 45 Degrees

Securely hold both blue steel and stainless steel moonclips in place on your belt with these Viper 8-Shot 9mm/.38/.357 Magnetic Moon-Clip Holders.

Features:

  • Aluminium hanger and belt bracket,
  • Strong 20mm dia. magnet
  • Top quality Delrin (no filler) post.

Notes:

  • The diameter of the magnetic is 19.39mm/0.763″
  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper 8-Shot 9mm/.38/.357 Magnetic Moon-Clip Holder – 90 Degrees

Securely hold both blue steel and stainless steel moonclips in place on your belt with these Viper 8-Shot 9mm/.38/.357 Magnetic Moon-Clip Holders.

Features:

  • Aluminium hanger and belt bracket,
  • Strong 20mm dia. magnet
  • Top quality Delrin (no filler) post.

Mounting Options:

  • Low
  • High

Notes:

  • The diameter of the magnetic is 19.39mm/0.763″
  • This Magazine Pouch will fit up to a 1.5″ width belt
  • For thicker belts, longer screws may be required to secure the belt bracket. These are easily obtainable from your local hardware store. The screws are 10 gauge, with 24 threads per inch (3/16 BSW or 3/16 UNC will also fit).

Viper 6/7-Shot Magnetic Moonclip – Replacement Magnet

This is a replacement magnet for the Viper 6-Shot Magnetic Moonclip Holders.

14.90mm/0.587inch Wide


Viper Holster Decal (V-AF 1911/2011 )

Personalise your Viper Holster with these fade-resistant decals.


Viper Holster Decal (V-SB CZ)


Viper Magnet & Bracket for STI/SVI Magnetic Double Stack Magazine Pouch

Designed to attach to either side of the Viper Products STI/SVI Magnetic Double Stack Magazine Pouch – Adjustable, purchase this magnetic so you can slap on a magazine quickly and know it will stay put.

Features:

  • 40mm dia. powerful magnetic.
  • Aluminium fixing plate and 2 x cap head countersunk stainless steel screws.